Overview
***also see attached data sheet, at the bottom of the page
The External sensor unit is similar to the Ceilling sensor unit, but is designed to be fitted outside.
It houses temperature, humidity, ambient light and PIR sensors.
In a typical installation there is an external sensor unit on the North and South faces of the main building.
The ambient light and humidity sensors are the same as in the ceilling sensor unit, the thermopile sensor is replaced by a standard plastic bodied temperature sensor (LM35CAZ) and the occupancy sensor is an external PIR. If requested, multiple PIRs can be wired in parallel to the External sensor unit using the 6 way spring clamp connector, or the AUX pin4 (auxiliary RJ45 connector).
External PIR and rain sensor:
|
RJ 45
pin number
|
Wire colour(568B)
ZG cable
|
12Vdc supply cable | Function |
Sensor wire colorus
Rain sensor
|
Sensor wire colours
PIR1
|
Sensor wire colours
PIR2
|
Sensor wire colours
PIR3
|
| 1 | white/orange | PIR1 | blue | ||||
| 2 | orange | PIR2 | blue | ||||
| 3 | white/green | 0V(+5V supply) | blue | blue | blue | blue | |
| 4 |
blue
don't punch down
|
12Vdc | 12Vdc | orange | red | red | red |
| 5 | white/blue | +5V | |||||
| 6 |
green
don't punch down
|
0V
(12Vdc supply)
|
0V
(12Vdc supply)
|
white/orange | red | red | red |
| 7 | white/brown | PIR3 | blue | ||||
| 8 | brown | RAIN1 | white/blue |